Sewage Sensor System by Keynes Controls
The Sewage Sensor System by Keynes Controls uses the Tryptophan sensor, brush unit and any other chemical sensor combined into a single sensor system. Other options of the sensor system are available. The submersible brush is used clean the Tryptophan sensor optics between measurements. Commonly used in this sensor system are Turbidity and Ammonia sensors. Measurements of sewage down to several ppb (parts per billion) are possible. The additional sensors are used to confirm the detection of sewage.
The sewage sensor is offered as a stand-alone model or real-time device when connected to a data logger or Web interface.
See the instrument range in the our Youtube video: https://youtu.be/F8_SjJWXRqc
The Sewage Sensor system by Keynes Controls is available for hire or sale. The instrument is shipped ready for deployment.
Communications
The Keynes Controls sewage sensor system supports as standard:
SDI12 - Direct connection to data loggers and Web Interfaces
RS485 - Direct connection to data acqusition system, Wi-Fi and LAN interfaces
MODBUS - Direct connection to plant wide SCADA systems
Sewage Sensor Specification
The ARGES Sewage Sensor System by Keynes Controls supports the requirements for logging based upon the UK Dept of Environment Food & Rural Affairs Continuous Water Quality Monitoring Project.
- 30 secs to 1 Day Logger Period
- Automatic Sensor Identification
- Free Android APP
- Supports any ARGES Sensor
- 2 million record storage.
- Optional USB Interface
- Real-time temperature compensated clock
- Programmable Brush Unit
- Stainless steel eyelet strain relief.
Optional Sensors that can be combined into the Sewage Sensor
| Fluorometers | Selective Ions |
| Ammonium | Nitrate |
| Turbidity | Chloride |
| Tryptophan | Fluoride |
| Hydrocarbon | Chloride |
| CDOM / FDOM | Lead |
Sensor Deployment
The images opposite demonstrate the ARGES Sewage Sensor System by Keynes Controls kit and deployment. Simply lower the sensor into water course under investigation and take measurements.
The free Windows Applications Software gives the user the ability to review Sewage levels instantly. Measurements are stored in a CSV text file that can be loaded directly into a spreadsheet.
The Keynes Sewage Sensor can be connected to Windows PC, stand-alone data loggers, Web interfaces and plant-wide SCADA applications.
Quality Measurements
All of the ARGES sensor range store the device serial number and calibration date internally. This information can be accessed on demand using the simple SDI12 industry commands. The serial number for the sensor is factory set and cannot be adjusted.
Optional USB Interface
The optional USB media converter can be used to connect a multiparameter instrument to a PC for configuration, testing and measurement operations.
All of the chemical sensors are supported with a free issue of the QLOG applications software.
Part Number: USB-SDI12-AG1
The ARGES Sensor range, seamlessly integrates into the Q-LOG Applications Software.
Our Q-LOG software runs on the widely recognised Windows Operating system, you have the ability to calibrate, adjust instrument network address, and effortlessly display measurements on a series of panel meters and charts. Conveniently store results in text based files for quick analysis in spreadsheets.
Our highly accurate chemical sensors provide chemical concentrations and local temperature directly readings in SI units (Engineering units). Customise the SI units based on your instrument's capabilities, including support for multiple units like turbidity sensors, all easily managed through the free applications software.
ARGES Turbidity, USB-SDI12-AG1, Tryptophan, ARGES Logger, QLOG Chemical, ARGES Chlorophyll, ARGES Chloride, ARGES pH, ARGES Ammonium, Turbidity Logger, ARGES pH, ARGES Conductivity, Effluent sensor, Influent sensor, Human sewage sensor, Sewage sensor, Sewage logger. Sewage detector