Precision Temperature Probe by Keynes Controls
TEMP-200 Temperature Sensor
The TEMP-200 temperature probe offers high precision temperature readings with SDI12 digital communications in a completely sealed probe. The Precision Temperature Probe by Keynes Controls sensor supports readings from -200 to + 200 Degrees Celsius.
The TEMP-200 is submersible to 1 m and has a 200 mm tip. The Precision Temperature Probe by Keynes Controls supports supports enhanced addressing allowing up to 36 sensors to be used on a single network. The use of the SDI12 network enables the probe to be easily integrated on to data loggers for remote applications, and when operated with the optional USB interface can be for more local applications.
Product Features
- Built in SDI12 Communications
- Very low stand-by power
- Fast Start Time < 1 Sec
- Direct connection to 3rd Party Loggers
- Full Digital Operation
- Optional USB Interface
- -200 to + 200 Degrees Celsius Range
- Free Windows Application Software
- 200 mm tip - 20 mm Diameter body.
- 2 m cable as standard.
Sensor Accuracy and Resolution
| Accuracy | Typical |
| -200 to -100 | ±0.2 ºC |
| -100 to 0 ºC | ±0.1 ºC |
| 0 to 50ºC | ±0.05 ºC |
| 50 to 150ºC | ±0.1 ºC |
| 150 to 200ºC | ±0.2 ºC |
| Resolution: | |
| 0.001 ºC |
Accessories
Keynes Controls manufactures a range of accessories that can be used to integrate the temperature probes into larger measurement solutions and connect on to a Windows PC for local applications. The probes can be used for laboratory applications in collaboration with other similar sensors.
The USB media converters can power the probe directly from the PC USB port.
The expansion block connects up to 8 sensors together, and can be daisy-chained to additional blocks in order to simplify the creation of larger applications.
Q-LOG Software
The temperature probe is integrated into the powerful free Q-LOG software.
Our Q-LOG software runs on the widely recognized Windows Operating system, you have the ability to calibrate, adjust instrument network address, and effortlessly display measurements on a series of panel meters and charts. Conveniently store results in text based files for quick analysis in spreadsheets.
Q-LOG can be used to test the probes prior to installation into data loggers etc..
Experience the convenience of Q-LOG, enabling you to effortlessly make and install calibration values into your instrument.
For added convenience, the optional USB interface allows you to comprehensively test and validate the sensors' operations, ensuring seamless integration into your own application. Trust in the performance and accuracy of our multi-parameter systems!