SDI12 RS485 MODBUS USB Media Converters
Keynes Controls offers a meticulously designed and expertly manufactured assortment of opto-isolated USB media converters for utilization with intelligent instrumentation. Browse our extensive collection and take a look at some of our videos to see our UBS Convertors in more detail.
The media converters opto-isolate the digital network from the PC USB Port.
A USB Port Status indicator illuminates to show when the PC Port is operating to specification.
Transmit and Receive LED indicators show the network traffic and are ideal for diagnosing problems. The Transmit indicator illuminates when the PC sends commands to sensors on the network. The Receive Indicator shows when a sensor sends information to the PC.
Keynes Controls supplies SDI12 RS485 MODBUS USB Media Converters with a free copy of the Keynes Applications Software QLOG.
SDI12 / RS485 / MODBUS Digital Network Support
Model: USB-SDI12-Pro
Isolated USB to SDI12 digital network media converter with external power supply port, Status, Transmit and Receive LED Indicators.
Type A USB port is used to connect the device to a host Windows PC.
Model: USB-SDI12-AG1
Isolated USB to SDI12 digital network media converter with bayonet connector, Status, Transmit and Receive LED Indicators.
Type A USB port is used to connect the device to a host Windows PC
Model: USB-SDI12-POST
Isolated USB to SDI12 digital network with spring loaded terminal posts, USB Port Status, Transmit and Receive LED Indicators.
Type A USB port is used to connect the device to a host Windows PC.
Model: USB-485-Pro
Isolated USB to RS485 / Modbus digital network with external power supply port and USB Port Status LED Indicator.
Type A USB port is used to connect the device to a host Windows PC.
Product Videos
The following videos demonstrate the Keynes Controls USB media converters in operation.
The USB media converters are available for the SDI12, RS485 and Modbus networks, Each device is supplied with a free copy of the Keynes Q-LOG Data Display software that can be used to Configure, Test Measurements, Display Results and Store Values from intelligent sensors and interfaces.
The media converters can be used by 3rd party products supporting the same network as the chosen converter.
1. Supports SDI12 / RS485 / High Spead 485
2. Assign /Edit Sensor Calibration Factors
3. Assign and adjust Sensor Network Address
4. Start and Stop Data Acquistion Operations
5. Panel Meter and Real-time Charts
6. Display and Record Measurements
7. Supports 3rd Party Intelligent Sensors
8. User Configure for 3rd Party Products
