Turbidity Logger by Keynes Controls
The Turbidity logger by Keynes Controls uses the Keynes turbidity sensor, brush unit any any other ARGES sensor. are used to group the ARGES range of chemical sensors and brush unit to form a dedicated measurement solution. The submersible brush is used clean the sensor optics between measurements.
The Turbidity logger is offered as a stand-alone model or as a real-time device when using any of the in-built digital networks.
See the instrument range in the our Youtube video: https://youtu.be/F8_SjJWXRqc
The logger is commonly deployed with the ARGES Tryptophan or PAH sensor.
The Turbidity Logger by Keynes Controls is available for hire or sale. The instrument is shipped ready for deployment.
Communications
The Keynes Controls multiparameter housings support as standard:
SDI12 - Direct connection to data loggers and Web Interfaces
RS485 - Direct connection to data acqusition system, Wi-Fi and LAN interfaces
MODBUS - Direct connection to plant wide SCADA systems - The unit acts as a MODBUS slave.
Logger Specification
The ARGES Turbidity logger supports the requirements for logging based upon the UK Dept of Environment Food & Rural Affairs Continuous Water Quality Monitoring Project.
- 10 secs to 1 Day Logger Period
- Automatic Sensor Identification
- Free Android APP
- Supports any ARGES Sensor
- 2 million record storage.
- Optional USB Interface
- Real-time temperature compensated clock
- Programmable Brush Unit
- Stainless steel eyelet strain relief.
Optional Sensors
| Fluorometers | Selective Ions |
| Ammonium | Nitrate |
| Turbidity | Chloride |
| Tryptophan | Fluoride |
| Hydrocarbon | Chloride |
| CDOM / FDOM | Lead |
Sensor Deployment
The images opposite demonstrate the fully real-time version Turbidity kit and its deployment.
The Windows software gives the user the ability to review sensor readings instantly. Measurements are stored in a CSV text file that can be loaded directly into a spreadsheet.
The turbidity logger is supplied with free Android APP to make system configurations, and to download measurements. The logger only requires to be deployed into place for readings to be made.
Quality Measurements
All of the ARGES sensor range store the device serial number and calibration date internally. This information can be accessed on demand using the simple SDI12 industry commands. The serial number for the sensor is factory set and cannot be adjusted.
The ARGES level sensor can is available in a range of models depending upon depth and accuracy requirements. The level sensor can also be adjusted to allow for local gravity and salinity effects. The user has full configuration control using the QLOG software. The standard water level sensor has a range of 0 .. 50m.
Optional USB Interface
The optional USB media converter can be used to connect a multiparameter instrument to a PC for configuration, testing and measurement operations.
All of the chemical sensors are supported with a free issue of the QLOG applications software.
Part Number: USB-SDI12-AG1
The ARGES Sensor range, seamlessly integrates into the Q-LOG Applications Software.
Our Q-LOG software runs on the widely recognised Windows Operating system, you have the ability to calibrate, adjust instrument network address, and effortlessly display measurements on a series of panel meters and charts. Conveniently store results in text based files for quick analysis in spreadsheets.
Our highly accurate chemical sensors provide chemical concentrations and local temperature directly readings in SI units (Engineering units). Customise the SI units based on your instrument's capabilities, including support for multiple units like turbidity sensors, all easily managed through the free applications software.
ARGES Turbidity, USB-SDI12-AG1, Tryptophan, ARGES Logger, QLOG Chemical, ARGES Chlorophyll, ARGES Chloride, ARGES pH, ARGES Ammonium, Turbidity Logger, ARGES pH, ARGES Conductivity.