Fixed Angle Offset In-Place-Inclinometers by Keynes Controls
Keynes Controls manufactures In-place-inclinometers that can be used to measure Fixed Angular Offset movements 30, 45, 60 degrees.
In-Place Inclinometer sensors are available for communications on the SDI12, RS485 and Modbus Networks, The RS485 version Inclinometers can be directly connected Wi-Fi or Local Area Network interfaces for remote measurement applications.
Fixed Angle Offset In-Place-Inclinometers by Keynes Controls
IPI-D-15-SDI12 Dual Axis Verical Sensor SDI12 Communication
IPI-S-15-SDI12 Singlel Axis Verical Sensor SDI12 Communication
IPI-D-15-485 Dual Axis Verical Sensor RS485 Communication
IPI-S-15-485 Single Axis Verical Sensor SDI12 Communication
Watch The Video
Range Of Accessories
We can supply a range of accessories for use with the Fixed Angle Offset In-Place-Inclinometers by Keynes Controls
8 Port Expansion Block which is used to connect sensors together and to a Data Acquisition System
Part Number : SEN-PCB-8
A range of Wheel assemblies supporting most casings can be supplied with the instruments. A dual wheel assembly is available for large spaced vertical sensor chains.
Part Number: I-P-I Double-Wheel
The Keynes In-Place-Inclinometers can be connected to a range of different digital networks. The instruments can be connected to a LAN or Wi-Fi when used with a optional media converter
MODBUS Instruments
Keynes Controls can supply In-Place-Inclinometers operating on the MODBUS Network A full
Part Numbers
IPI-D-15-4MOD Vertical Dual Axis I-P-I Solid State +/- 15 Degree Range
IPI-S-15-4MOD Vertical Single Axis I-P-I Solid State +/- 15 Deg Range
Any software that supports MODBUS over RS485 can be used. The instruments act as slave units only and have to be polled for new measurements from the network master.
MODBUS Operations
A version of inclinometer sensors support MODBUS network operations. The inclinometer sensors act as a slave unit only and can communicate to suitable controllers and SCADA systems that support the MODBUS Protocol. The sensors support 16 and 32 bit registers. .
The inclinometer sensors can be connected to a PC based system using the optional USB-485-Pro media converter. This device can power the inclinometers and supports the correct timing protocols for data transmission for MODBUS and standard RS485 network communications.
Fixed Offset In-Place-Inclinometer
Keynes Controls can supply sensors with a fixed offset angle. Available options are 30, 45 and 60 Degree.
The offset angle inclinometers are often supplied as single axis instruments only
Communications options are SDI12, RS485 and MODBUS.
1 = Y Axis 2 = X Axis 3 = Angle Offset
4 = Angular Movement
Part Number: IPI-S-AX-SDI12 X=30, 45, 60
Additional Information
The optional Keynes Controls manufactured USB media converters can be used to connect an instrument, or instrument string directly to a Windows PC for setup and testing.
Inclinometer Connection to Wi-Fi
The image opposite shows how to connect the RS485 version inclinometers to a Windows PC using a Wi-Fi network and the free issue Keynes Q-LOG Software
The Keynes Control range of USB media converters can be used to connect intelligent sensors such as the In-Place-Inclinometers to a PC.
USB Connection to a Windows PC
Keynes Controls manufactures a range of USB media converters that can be used to connect an inclinometer, or inclinometer chain to a Windows PC. When used with the Q-LOG software the sensors can be configured, make test measurements and display results,
I-P-I MODBUS, MODBUS Inclinometer, vertical, horizontal inclinometer, tilt, Vibrating wire, SDI12, RS485, MODBUS RS485, I-P-I Chain, Vibrating wire Readout, Intelligent Inclinometer, submersible inclinometer, Fixed angle Inclinometer, 8 Channel expansion, landslip, structural, REBAR, piezometer, strain gauge, geotechnical
Free Windows Applications Software
The Q-LOG applications software can be used with the In-Place-Inclinometers to make test measurements, Configuration changes, Display and Store results in a series of charts and panel meters.
A Virtual COMM port feature is included enables the software to take measurements from the Inclinometers across a Wi-FI or LAN network.
